1. Home
  2. View Basket
  3. Checkout
  4. 01903 201081

Brass Castors with Brass Wheel (Screw and Plate Fitting)

Ref: BCSPmaster

Brass Castors Screw and Plate Style  (Sold in Pairs)

Brass Castors Screw and Plate Style  (Sold in Pairs)Brass Castors Screw and Plate Style  (Sold in Pairs)Brass Castors Screw and Plate Style  (Sold in Pairs)Brass Castors Screw and Plate Style  (Sold in Pairs)

Brass Castors Screw and Plate Style (Sold in Pairs)

Our range of antique style Brass Castors, made in solid brass with solid brass wheels.

Replace the damaged brass castors on your furniture (damaged castors can weaken your chair and sofa frames), or enhance your furniture by replacing your existing castors with Brass Castors.


SIZE
Brass Castors are available in 4 sizes .

25mm - 1" refers to the brass wheel size and the size of the plate, the height from the bottom of the wheel to the plate is 35mm - 1 3/8", the screw is approx 25mm - 1", screw dia.5mm - 3/8" including thread ( dont forget to make the pilot hole smaller)

28mm - 1 1/8" refers to the brass wheel size and the size of the plate, the height from the bottom of the wheel to the plate is 40mm - 1 1/2", the screw is approx 36mm - 1 3/8", screw dia.6mm - 1/4" including thread ( dont forget to make the pilot hole smaller)

32mm - 1 1/4" refers to the brass wheel size and the size of the plate, the height from the bottom of the wheel to the plate is 42mm - 1 5/8", the screw is approx 36mm - 1 1 3/8", screw dia.6mm - 1/4" including thread ( dont forget to make the pilot hole smaller)

38mm - 1 1/2" refers to the brass wheel size and the size of the plate, the height from the bottom of the wheel to the plate is 50mm - 2 ", the screw is approx 36mm - 1 3/8", screw dia.6mm - 1/4" including thread ( dont forget to make the pilot hole smaller)

FITTING BRASS CASTORS
The castor can be screwed into place easily, as the screw extends through the Brass body of the castor to a standard 'Philips' or single slot screwdriver head.

WHICH SIZE FITS
If you are fitting the castors to a narrow leg, the size will depend on the diameter at the bottom of the leg. ie if the bottom of the leg is 1 1/8" diameter, the 1 1/8" is the correct castor to fit. anything larger and the 'plate' will stick out from the bottom of the leg.

UPHOLSTERERS TIP
If you are replacing a pair of Brass Castors (never replace just one) and if the original hole has worn oversize,you can fill the hole with 'Plastic Padding' or 'Araldite' screw the castor into the filler, remove excess filler, and leave to set.


Wheel 25mm (pair) 9.99(Inc. VAT).
Wheel 28mm (pair) 12.80(Inc. VAT).
Wheel 32mm (pair) 15.90(Inc. VAT).
Wheel 38mm (pair) 20.20(Inc. VAT).

Recently Viewed